ZINC MAXIMUM N500

- High Zinc concentration
- Fast drying
- Good filling
- Anticorrosive properties
- Outstanding cathodic corrosion prevention
- Resistance to petrol, chemicals, and weather influences
- Spot-weldable
- Excellent adhesion
- Resistance to high temperatures and heat
- 400ml

Suitable for DIY or professional use. Ideal for protecting welded surfaces, pipes, tanks, and all metallic constructions which are exposed to corrosive factors.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 05-35°C.

TIPS:

- Ensure the surface is clean, dry and free of grease. - Remove loose old lacquer and rust and sand the surface
- Wear protective gloves, protective clothing, eye/face protection
- Always paint in an open space in the open air
- Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
- Spray surface from a distance of 25-30cm
- Apply Zinc Spray in several thin layers to avoid over application. Before each layer, shake the spray can well. Once the spray dries, a primer and a lacquer can be applied
- Paint first vertically and then horizontally
- After use, clean the Zinc Spray valve (turn the aerosol upside down and press the nozzle for approx. 5 seconds). The drying time depends on ambient temperature, air humidity, and thickness of the lacquer applied