METAL VARNISH N370

- Increases the brilliance of colour layers
- Weather and light resistant, UV-resistant, extends the life of works of art
- After drying, scratch, impact and shock resistant
- Very good adhesion
- Fixes grasses, straw and dried flowers
- Protective coating for works of art or wood, cardboard
- Oxidation protection for metal effect paint (different degrees of gloss)
- 400ml

Protects against erosions and beautifies any metal surface such as bronze, copper, tinplate, etc. Ideal for the final protecting layer on car paints.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.

TIPS:
- Ensure the surface is clean, dry, and free of grease
- Wear protective gloves, protective clothing, eye/face protection
- Always paint in an open space in the open air
- The space should be as dust-free as possible
- Protect the surrounding area from overspray
- Test spray on a non-visible area
- Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
- Spray surface from a distance of 25-30cm
- Apply in several thin layers, spraying in sweeping motions
- Don't go over bits you have missed but leave to dry and then re-varnish area. Don't go back over areas you have already done, as this can cause clouding
- Don't attempt to remove once applied
- Do not use with any non-acrylic media