SEMI-TRANSPARENT VARNISH MAHOGANY N601

- Tinted, protective finish
- Striking Effect on bamboo furniture, ornaments, wooden doors and shutters
- Mahogany shade
- Easy to spray tinted wood varnish protection for exterior wood surfaces
- Provides superior resistance to moisture and harmful UV rays
- Durable satin shine deepens its amber glow over time
- Don’t go yellow
- Washable, durable film ideal for wood floors, window frames, doors, trim, and furniture
- 400ml

Ideal for painting and protecting wooden surfaces and can be used on unpainted wood as well as to refresh old varnishes.

Shake the container at least 3 minutes after you hear the mixing ball. Before the first use spray it in the air for 3-4 seconds to remove any condensed color. After use turn the aerosol upside down and press the actuator for 2-3 seconds to clean the valve. If the nozzle is blocked, replace it with a new one. Use outdoors or in a well-ventilated area such as an open garage. Optimal application at temperature: 10-25°C and humidity below 65% to ensure proper drying. Storage 5-35°C.

TIPS:

- Ensure the surface is clean, dry, and free of grease
- Wear protective gloves, protective clothing, eye/face protection
- Always paint in an open space in the open air
- The space should be as dust-free as possible
- Protect the surrounding area from overspray
- Test spray on a non-visible area
- Remove any existing varnish, waxes, oils, wood stains, dust, dirt, grease, uneven areas and sticky stuff before applying a wood varnish
- Choose a day when the weather isn’t too humid. - Varnish will dry slower in humid or cold conditions
- Always spray with the can in a vertical position, otherwise the paint might 'spit' unevenly
- Spray surface from a distance of 25-30cm
- Apply in several thin layers, spraying in sweeping motions
- Don't go over bits you have missed, but leave to dry and then re-varnish area. Don't go back over areas you have already done, as this can cause clouding
- Don't attempt to remove once applied
- After use, clean the spray valve (turn the aerosol upside down and push the nozzle for about 5 seconds)