DUCK EGG BLUE N07

– Viscosity: 18-25sec (Flow Cup DIN4, 20οC)
– Density: 0.6-0.8 g/L (Density Cup 100cm3/20oC, ASTM D – 1475)
– VOC content : 580 g/L
– Flash Point: -104oC
– Drying time
(1 Layer, Temperature 20°C, Humidity <65%):
Touch: 5-10min
Through dry: 1h
Maximum hardness: 24h
– Coverage: 3.5m2/0.4L, 8.75m2/L
– GLOSS (GLOSS METER 600ASTM D – 1471):
1-3 GLOSS UNITS/MATT
– Can Pressure: 4bar (20oC), 8 bar (50oC)
– Contents: 400ml

Thoroughly clean the surface from dust, and any dirt. Protect the
surrounding area that you do not want to paint. Shake very well before use for at least 3 minutes after the mixing ball is heard. During the first use, spray in the air for 3-4 seconds to remove any sediment from the valve. Check the product on a testing surface. Spray the object you want to paint from a relatively close distance of 4-5cm with the white valve or 8-10cm with the black one. During spraying, you firmly move the container
alongside the sprayed surface. shake the container regularly, for best results apply 2 layers, waiting 3-5 minutes between them.
The optimal use temperature is 10oC - 25oC.

APPLICATION
Thoroughly clean the surface from dust, and any dirt. Protect the
surrounding area that you do not want to paint. Shake very well before use for at least 3 minutes after the mixing ball is heard. During the first use, spray in the air for 3-4 seconds to remove any sediment from the
valve. Check the product on a testing surface. Spray the object you want to paint from a relatively close distance of 4-5cm with the white valve or 8-10cm with the black one. During spraying, you firmly move the container alongside the sprayed surface. shake the container regularly, for best results apply 2 layers, waiting 3-5 minutes between them.
The optimal use temperature is 10oC - 25oC.

AFTER USE
Spray holding the can inverted for 3’’. Clean the caps with solvent.

STORAGE
5oC-35oC. Do not put in vehicles.

WHITE/BLUE SOFT CAP
– Fine Spray
– Soft Spray Touch
– Ideal for Details
– No Drips

BLACK CAP
– Wide Spray
– For Large Surfaces
– Fast Application
– No Drips